|
Key
Features
Dual
function for Access Control and Time &
Attendance (FINGER007, FINGER007P)
720
Fingerprints holders / 26,000 Event buffers (2,000 /
4,500 Fingerprints optional)
Standalone/Network communication via RS232/ RS422
(max. 32ch), TCP/IP available with LAN Converter
Dual
Fingerprint Registration
Fingerprint Automatch Identification
Independent 4 inputs /4 output including 2
FORM-C Relay outputs
External
reader port for Anti-pass back operation
Dual
Tamper switches
High
Protection from scratch and ESD
|
|
|
Comparison
Table
Finger-007:
Dual function for access control and time attendance.
Built-in 125KHz RF Reader (10 cm).
Back lighting on keypad. RF only / RF+Fingerprint /
RF+Password (4 digit)+Fingerprint
Finger-007P:
Dual function for access control and time attendance
PIN (4~8 digit)+Fingerprint
Specifications
CPU: 32
bit Strong Arm and dual 8 bit microprocessor
Memory:
Module: Program Memory (8K byte Rom), Data Memory (1M
bit / 2M bit / 4M bit flash memory)
Controller: Program Memory (64K byte flash), Data
Memory (4M bit Sram with battery backup)
Fingerprint User / Event Buffer: 720/2,000/4,500
Fingerprint Templats / 26,000 buffers
Template Size: 800 bytes for dual fingerprint templates
Reading Time / Verification Time: Card (30ms), Fingerprint
(less than 1 sec, 3sec for automatch)
RF Reader: Built-in 4" 125KHz RF reader (10cm)
Extended
Reader Ports: 1 Reader port (26 bit wiegand, 8 bit burst)
for anti-pass back
Input/Output Ports:
Input: 4 (isolation)
Output: 2 Form-C Relay (COM, NO, NC) Rating Max. 2A,
2 TTL
LCD Display: 1 x LCD Module, 2 Lines x 16ch, 65.5 x
13.8,, screen
Keypad: 16 numeric keypad with back lighting
Communications:
RS232/RS422 (up 32ch), TCP/IP available with LAN
converter
Baud Rate: 4800, 9600 (default), 19200 bps and 38400
bps
Software programmable
LED indicator/Beeper: 3 LED (red/green/yellow), Piezo
buzzer
Power: DC 12V, max 350mA
Operation environment: -15‘Ι~40‘Ι, 10~90% RH
(non-condensing)
Colour: Dark pearl gray
Weight: net 547g (1.20 lbs) |
